No. of layers: 4
Material: FR4 1.2 mm
Surface treatment: Hot air levelling (HAL)
Minimum drilled hole diameter: 0.40 mm
Minimum line width: 0.15 mm
Minimum line spacing: 0.10 mm

No. of layers: 4
Material: FR4 1.0 mm
Surface treatment: Immersion Gold
Minimum drilled hole diameter: 0.25 mm
Minimum line width: 0.10 mm
Minimum line spacing: 0.10 mm

No. of layers: 4
Material: FR4 1.6 mm
Surface treatment: OSP
Minimum drilled hole diameter: 0.30 mm
Minimum line width: 0.15 mm
Minimum line spacing: 0.12 mm

No. of layers: 4
Material: FR4 1.2 mm
Surface treatment: Hot air levelling (HAL)
Minimum drilled hole diameter: 0.25 mm
Minimum line width: 0.10 mm
Minimum line spacing: 0.10 mm